Boschert Notchers
Boschert® builds punching machines of the highest quality, using a
completely new and advantageous construction principle. The patented
TRI-GIDE™ system gives all Boschert notching machines the greatest accuracy
and durability of any notcher made today.
Featuring three large guiding cylinders. Two guiding cylinders are located at the top of the machine, near the blades, and the third cylinder fully integrated with the hydraulic piston located at the base. Torque from cutting heavy material is distributed evenly to all three cylinders.
This system eliminates blade clearance adjustment for different material thicknesses, frequent blade sharpening due to sloppy guiding, uneven wear, and replacement problems with usually assiciated traditional guiding systems.
With TRI-GIDE™ you will enjoy long blade life due to precise, rigid ram guiding,
Burr-free cuts on all gauges (within capacity), and
Off-center loading – 1 x 6 notch is no problem.
For details please Email
OR call us toll free 1-877-513-1773.
  |
Boschert LITE Hydraulic Power NotcherFeatures include:- Front-to-Back cutting - holds material against stops - Milled table surface – keeps material from sticking - Hi-Carbon Hi-chrome Blades – overlap on the cutting tip to eliminate blade chipping Specifications: - 5/32 mild steel capacity - 10 ga. stainless steel capacity - 8-7/8 x 8-7/8 90° notch - Front to back cutting to hold material against stop - Milled bed surface for no float or stick operation - 35 wide by 25 deep table with milled surface so material does not float or stick - Front to back cutting - Hi-Carbon, Hi-Chrome blades that overlap on the cutting edge to eliminate blade chipping - Internal stop for shearing - Two heavy-duty adjustable stops with 12 horizontal bars - One engraved brass scale and T-slot parallel to each blade - Moveable electric foot pedal - 50 strokes per minute (adjustable) - Solid state circuitry - Jog, single or continuous mode - 4.5 horsepower motor - Scrap bucket Email for quote OR Call toll free: 1-877-513-1773 for details |
  |
Boschert Eagle and Eagle 250 Hydraulic Power NotcherFeatures include:- Front-to-Back cutting - holds material against stops - Milled table surface – keeps material from sticking - Hi-Carbon Hi-chrome Blades – overlap on the cutting tip to eliminate blade chipping Specifications: - 1/4 mild steel capacity - 3/16 stainless steel capacity - 8-7/8 x 8-7/8 90° notch - Front to back cutting to hold material against stop - Milled bed surface for no float or stick operation - 35 wide by 25 deep table with milled surface so material does not float or stick - Front to back cutting - Hi-Carbon, Hi-Chrome blades - Internal stop for shearing - Two patented 12 combination horizontal hold down and stop bars - Engraved brass scales - Moveable electric foot pedal - Adjustable stroke, 50 per minute - Solid state circuitry - Jog, single or continuous mode - 6.5 horsepower motor - Scrap bucket - Eagle 250 additional features -Two material hold downs -Special blade guard Email for quote OR Call toll free: 1-877-513-1773 for details |
  |
Boschert SILVER EAGLE with COPE Hydraulic NotcherNotching Station:- 1/4 mild steel*, 5/32 stainless steel** capacity - 8-7/8 x 8-7/8 90° notch - Super size table, 43 wide by 31 deep - Milled bed surface for no float or stick operation - Moveable electrical foot pedal - Front to back cutting to hold material against stop - Adjustable stroke, 35 to 50 per minute - Two material hold downs - Two heavy duty stops with 12 sliding bars - Scale and T-shot left to right at front of bed - Scale and T-shot parallel to the blades - Scale on left and right side of table top - Wired 220v/60c/3ph - Internal stop for shearing - Scrap bucket Coping Station - - 5/32 mild steel*, 1/8 stainless capacity - Cope 3.937 deep by 1 to infinity by moving the stock - Moveable foot pedal - Scrap bucket * mild steel designated as 50,000 psi ** Stainless designated as 75,000 psi Email for quote OR Call toll free: 1-877-513-1773 for details |
  |
Boschert SILVER EAGLE with Punch NotcherNotching Station:- 1/4 mild steel*, 5/32 stainless steel** capacity - 8-7/8 x 8-7/8 90° notch - Super size table, 43 wide by 31 deep - Milled bed surface for no float or stick operation - Moveable electrical foot pedal - Front to back cutting to hold material against stop - Adjustable stroke, 35 to 50 per minute - Two material hold downs - Two heavy duty stops with 12 sliding bars - Scale and T-shot left to right at front of bed - Scale and T-shot parallel to the blades - Scale on left and right side of table top - Wired 220v/60c/3ph - Internal stop for shearing - Scrap bucket Punching Station - - Trumpf style tooling - 5/32 mild steel*, 1/8 stainless steel** - 5/32 mild steel*, 1/8 stainless steel** - Size of punching table: 43 wide by 13 deep - Movable foot pedal - Scrap bucket * mild steel designated as 50,000 psi ** Stainless designated as 75,000 psi Email for quote OR Call toll free: 1-877-513-1773 for details |