Drill Presses > Birmingham Drill Presses
Active Machinery now offers the full line of Birmingham drill presses
for sale. These are high quality, value priced drill presses that will
meet the production needs of your shop.
Birmingham Drill Presses
Active Machinery now offers the full line of Birmingham drill presses
for sale. These are high quality, value priced drill presses that will
meet the production needs of your shop.
For details or a quote Email
OR call us toll free 1-877-513-1773.
 |
Birmingham Rong Fu RF-19 Drill PressMotor: 2HP, 1 phase 110 volt or 220 volt or 3 phase 220 volt• Spindle Speeds: (12) 120 to 2500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 5-1/2" • Working Table: 8.25" x 28.75" • Table Longitudinal X travel: 18-1/8" • Table Cross Y Travel: 6-1/4"" • Shipping weight: 700 Lbs • Capacity: drilling - 1.25" (steel), tapping - 1/2" (steel), end mill: 3/4", face mill - 4" • Standard Accessories: 3.5" angle type drill press vise, 1/2" drill chuck w/key, drill chuck arbor R8/JT6, 3" face cutter, shell mill arbor, forward/reverse drum switch, and draw bar. Manufactured in Taiwan. Email for quote OR Call toll free: 1-877-513-1773 for details |
 |
Birmingham Rong FU RF35 Drill PressMotor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase• 5 speed spindle: 340, 660, 1060, 1665, 3000 rpm • Spindle Taper : MT3 • Spindle travel: 5" • Spindle horizontal travel: 14.87" • Spinde to table - Min: 6.5" • Spindle to table - Max: 24" • Spinde to column - Min: 6" • Spindle to column - Max: 20.87" Capacity: drilling - 1.25" (steel), end mill: 3/4", face milling - 3" • Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch. Manufactured in Taiwan. Options available: Cabinet with chip pan, 52 piece clamping kit, work light, floor type coolant system. Email for quote OR Call toll free: 1-877-513-1773 for details |
|
Birmingham Rong Fu RF-40 Geared Head Drill-Mill• Head tilts 90° left and 45° right and swivels• Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 6.5" • Spindle to table (max): 18.5" • Table Longitudinal X travel: 19.75" • Table Cross Y Travel: 9" • Shipping weight: 650 Lbs Capacity: drilling - 1.25" (steel), end mill: 3/4", face mill - 4" • Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch, table with standard T-slots. Manufactured in Taiwan. Options available: Cabinet with chip pan, power down feed, 52 piece clamping kit, work light, floor type coolant system, digital readout. Email for quote OR Call toll free: 1-877-513-1773 for details |
 |
Birmingham Rong Fu RF-40 Geared Head Drill-Mill• Extra heavy duty square column design• Head tilts 90° left and 45° right • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 10" • Spindle to table (max): 18.5" • Table Longitudinal X travel: 20.5" • Table Cross Y Travel: 8.25" • Shipping weight: 800 Lbs Capacity: drilling - 1.25" (steel), end mill: 3/4", face mill - 4" • Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch, table with standard T-slots. Manufactured in Taiwan. Options available: Cabinet with chip pan, power down feed, 52 piece clamping kit, work light, floor type coolant system, digital readout. Email for quote OR Call toll free: 1-877-513-1773 for details |
 |
Birmingham Radial Drill Press• Extra Auxiliary Dial for Spindle Feed Depth• Arm Raising and Limit Safety Devices • Spindle Balance Mechanism • Coolant Pump • Work Light • Box Table • Tool Set See Model specifications below Email for quote OR Call toll free: 1-877-513-1773 for details |
| TPR-720 |
TPR-820 |
TPR-920 |
TPR-1100 |
TPR-1230 |
|
Column Diameter |
8.25" [210mm] |
8.25" [210mm] |
8.25" [210mm] |
10.25" [260mm] |
11.81" [300mm] |
Column to spindle-max |
29.5" [750mm] |
33.5" [850mm] |
37.37" [950mm] |
43.31" [1100mm] |
48.44" [1230mm] |
Column to spindle-min |
8.62" [220mm] |
8.62" [220mm] |
8.62" [220mm] |
19.62" [245mm] |
13.38" [340mm] |
Spindle head travel |
20.87" [530mm] |
24.87" [630mm] |
28.75" [730mm] |
33.62" [855mm] |
35" [890mm] |
Arm elevating height |
23.81" [605mm] |
25.56" [650mm] |
25.56" [650mm] |
24" [600mm] |
34.62" [880mm] |
Box Table area |
23.5x17.5x15" [600x445x380mm] |
25x20.5x15" [635x520x415mm] |
|||
Base Dimensions |
49.5x25.2x6.3" [600x445x380] |
68 x 28 x 6.5" |
|||
Spindle Taper |
MT4 |
MT4 |
MT4 |
MT4 |
MT4 |
Spindle Stroke |
8.25" |
8.25" |
8.25" |
9" |
9.87" |
Spindle RPM |
(6) 88,154,282,455,796,1500 |
(12) 44 to 1500 |
|||
Main Motor |
2 HP |
2 HP |
2 HP |
3 HP |
3 HP |
Elevating Motor |
1 HP |
1 HP |
1 HP |
1 HP |
1 HP |
| Hole Capacity |
|||||
Drilling Steel |
1.5" |
1.5" |
1.5" |
1.62" |
1.62" |
Drilling Cast Iron |
2" |
2" |
2" |
2.18" |
2.18" |
Tapping Steel |
1" |
1" |
1" |
1" |
1" |
Tapping Cast Iron |
1.25" |
1.25" |
1.25" |
1.5" |
1.5" |
Boring Steel |
2.75" |
2.75" |
2.75" |
3.38" |
3.38" |
Boring |
4" |
4" |
4" |
4.75" |
4.75" |